HVAC Control Unit Removal/Installation (Without Climate Control)

HVAC Control Unit Removal/Installation

1. Move the shift lever to position 1.

2. Place protective tape (A) on both sides of the dashboard next to the HVAC control unit.






3. Insert a flat-tip screwdriver in the groove on each side, then pull straight out on both screwdriver shafts.

NOTE: Do not pry with the flat-tip screwdrivers.






4. Remove the HVAC control unit (A). Disconnect the connector (B), then remove the harness clip (C).





5. Install the control unit in the reverse order of removal. After installation, operate the various functions to make sure they work properly.

6. Run the self-diagnosis function to confirm that there are no problem in the system How To Troubleshoot The Heating And A/C Systems (Without Climate Control).