Trunk / Liftgate Latch: Service and Repair

Tailgate Latch Replacement

NOTE:

- Put on gloves to protect your hands.
- If the tailgate latch does not open by pulling the tailgate handle, remove the maintenance lid from the tailgate lower trim panel, then turn the emergency lever (A) clockwise as shown.





1. Remove the tailgate lower trim panel .

2. Disconnect the tailgate release actuator connector (A) and the latch switch connector (B), then remove the bolts securing the tailgate latch (C).





3. Pull out the tailgate latch, then remove the latch.

4. Install the latch in the reverse order of removal, and note these items:

- Make sure each connector is plugged in properly.
- Make sure the tailgate opens properly and locks securely.