Interior Trim Removal/Installation - Cargo Area

Interior Trim Removal/Installation - Cargo Area

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*Available through the Honda Tool and Equipment Program; 888-424-6857

NOTE:

- Put on gloves to protect your hands.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
- Take care not to bend or scratch the trim or the panels.

Rear Trim Panel

1. Remove the cargo area floor.

2. Remove the tailgate weatherstrip, as needed Service and Repair.

3. Remove the cargo hook (A) (two places).






4. Remove the clips (A), then pull out the rear trim panel (B) to detach the clips (C, D).





5. Install the trim in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips into place securely.

Cargo Area Floor

1. Remove the cargo area floor (A).





2. Install the floor in the reverse order of removal.