VSA Off Switch Does Not work (VSA Cannot be Turned OFF)

VSA System Symptom Troubleshooting - VSA OFF switch does not work (VSA cannot be turned OFF)

VSA OFF switch does not work (VSA cannot be turned OFF) ('10-11 models)

1. Turn the ignition switch to LOCK (0).

2. Check the VSA OFF switch.

Is the VSA OFF switch OK?

YES -

Go to step 3.

NO -

Replace the VSA OFF switch Testing and Inspection.�

3. Disconnect the VSA OFF switch 5P connector.

4. Disconnect the gauge control module 36P connector.

5. Check for continuity between VSA OFF switch 5P connector terminal No. 2 and body ground.





Is there continuity?

YES -

Repair a short to body ground between the gauge control module and the VSA OFF switch.�

NO -

Substitute a known-good gauge control module Gauge Control Module Replacement, then go to step 1 VSA Off Switch Does Not work (VSA Cannot be Turned OFF) and recheck. If it is OK, replace the original gauge control module Gauge Control Module Replacement.�