Climate Control Unit Removal/Installation

Climate Control Unit Removal/Installation

1. Move the shift lever to position 1.

2. Place protective tape (A) on both sides of the dashboard next to the climate control unit.






3. Insert a flat-tip screwdriver in the groove on each side, then pull straight out on both screwdriver shaft.

NOTE: Do not pry with the flat-tip screwdrivers.






4. Remove the climate control unit (A). Disconnect the connector (B).





5. Install the control unit in the reverse order of removal. After installation, operate the various functions to see whether it works properly.

6. Run the self-diagnosis function to confirm that there are no problems in the system. Initial Inspection and Diagnostic Overview