Removal and Replacement

Starter Removal and Installation

Removal

1. Do the battery terminal disconnection procedure Procedures.

2. Remove the front splash shield Front Splash Shield Replacement.

3. Remove the intake manifold bracket.

K24Z1 engine





K24Z6 engine





4. Disconnect the knock sensor connector.

- K24Z6 engine Service and Repair

5. Remove the harness clamp (A), and remove the two bolts (B) securing the starter, then remove the starter from the engine.






6. Disconnect the positive starter cable (A) from the B terminal, then disconnect the S terminal connector (B).





7. Remove the harness clamp (C), then remove the starter.

Installation

1. Connect the positive starter cable (A) and the S terminal connector (B). Make sure the positive starter cable crimped side of the ring terminal faces away from the starter when you connect it.





2. Install the harness clamp (C).

3. Install the starter, then tighten the two bolts (A), and then install the harness clamp (B).






4. Connect the knock sensor connector.

- K24Z6 engine Service and Repair

5. Install the intake manifold bracket.

K24Z1 engine





K24Z6 engine





6. Install the front splash shield Front Splash Shield Replacement.

7. Do the battery terminal reconnection procedure Procedures.

8. Start the engine to make sure the starter works properly.