Audio Unit Removal/Installation (Without Navigation)

Audio Unit Removal/Installation

SRS components are located in this area. Review the SRS component locations Locations, and the precautions and procedures Service and Repair before doing repairs or service.

NOTE:

- Eject all the CDs before remove the audio unit to prevent damaging the CD player's load mechanism.
- Put on gloves to protect your hands.
- Take care not to scratch the dashboard and related parts.
- If you are replacing the audio unit, write down the audio presets (if possible), and enter them into the new audio unit.

1. Make sure you have the anti-theft code for the audio system.

2. Remove the center panel Dashboard Center Panel Removal/Installation.

3. Remove the mounting bolts (A), then pull out the audio unit (B).

EX and SC

4. Disconnect the connectors and the AM/FM antenna sublead from the audio unit, and remove it.

5. Remove the mounting bolts (C) securing the audio unit to the audio unit brackets (D).

6. Install the audio unit in the reverse order of removal, and note these items:

- Make sure the audio unit connector is plugged in properly, and the AM/FM antenna sublead is connected properly.
- Enter the anti-theft code for the audio system.
- Set the clock.