Air Register: Service and Repair

Dashboard Vent Removal/Installation

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*

NOTE:

- Take care not to scratch the dashboard or the related parts.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
- The driver's vent is shown, the passenger's vent is similar.

1. Remove the dashboard vent (A).

1. Apply protective tape around the vent to prevent damage.

2. Carefully insert the appropriate trim tool next to the clips, and detach the clips by prying on the vent.

3. Pull out on the vent.





2. Install the vent by pushing the clips into place securely.