DVD Player: Service and Repair

DVD Player Unit Removal/Installation

SRS components are located in this area. Review the SRS component locations Locations, and the precautions and procedures Service and Repair before doing repairs or service.

NOTE:

- Eject all the CD/DVDs before removing the DVD player to prevent damaging the DVD player's load.
- Put on gloves to protect your hands.
- Take care not to scratch the dashboard and related parts.
- If a disc is loaded remove it before continuing.

1. Remove the center lower cover Dashboard Center Lower Cover Removal/Installation.

2. With premium audio system: Remove the HandsFreeLink control unit Service and Repair.

3. Remove the bolts (A), and pull out the DVD player unit (B).





4. Remove the harness clip (C), then disconnect the connectors (D) from the DVD player unit.

5. Remove the four mounting screws, then remove the bracket (A).





6. Install the DVD player unit in the reverse order of removal, and make sure the DVD player unit connectors are plugged in properly. Then test the DVD player unit operation.