Audio Unit Removal/Installation

Audio Unit Removal/Installation

SRS components are located in this area. Review the SRS component locations Locations, and the precautions and procedures Service and Repair before doing repairs or service.

NOTE:

- Eject all the discs before removing the audio unit to prevent damaging the CD player's load mechanism.
- If you are replacing the audio unit, write down the audio presets (if possible), and enter them into the new audio unit.
- Put on gloves to protect your hands.
- Take care not to scratch the dashboard and related parts.
- Lay a workshop towel under the parts when working on them to protect the face panel from scratches or other damage.

With navigation

1. Make sure you have the anti-theft codes for the audio and navigation system.

2. Remove the center panel Dashboard Center Panel Removal/Installation.

3. Remove the bolts (A), then pull out the audio unit (B).





4. Disconnect the connectors (C), then remove the audio unit.

5. Remove the bolts (A), and the bracket (B).





6. Install the audio unit in the reverse order of removal, and note these items:

- Make sure all connectors and AM/FM antenna sublead are secure.
- Enter the anti-theft codes for the audio system, and set the clock.
- If necessary, enter the navigation system code.

Without navigation

1. Make sure you have the anti-theft codes for the audio system.

2. Remove the center panel Dashboard Center Panel Removal/Installation.

3. Remove the bolts (A), then pull out the audio unit (B).

With premium audio system/6CD type





Without premium audio system/6CD type





Without premium audio system/1CD type





4. Disconnect the connectors (C), then remove the audio unit.

5. Remove the bolts (A), and the bracket (B).

6CD type





1CD type





6. Install the audio unit in the reverse order of removal, and note these items:

- Make sure all connectors and AM/FM antenna sublead are secure.
- Enter the anti-theft code for the audio system, then enter the audio presets, and set the clock.