Passenger Assist Handle: Service and Repair

Grab Handle Removal/Installation

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*

NOTE: Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Lower the grab handle, then pry out the caps (A) with the appropriate trim tool. Remove the self-tapping ET screws, then remove the grab handle (B).






2. Install the grab handle in the reverse order of removal, and note these items:

- If the side curtain airbag has deployed, replace the grab handles with new ones.
- To prevent the side curtain airbags from deploying improperly and possibly causing injury, inspect the removed grab handle (A), and replace it if it has any damage or deformations.