Sunroof / Moonroof: Adjustments

Moonroof Glass Position Adjustment

The roof panel (A) should be even with the glass weatherstrip (B), to within 0.3+1/-1 mm (0.01+0.04/-0.04 in) all the way around. If not, make the following adjustment:





1. Remove the bracket covers. Service and Repair

2. Loosen the bolts with a TORX T25 bit, and adjust the glass (A).





3. Tighten the bolts to the specified torque, and reinstall the bracket covers.

4. Check for water leaks. Let the water run freely from a hose without a nozzle. Do not use a high-pressure spray.

NOTE: It is normal for some water to seep past the moonroof into the moonroof frame and exit through the drains.