Moonroof Drain Channel Replacement

Moonroof Drain Channel Replacement

1. Remove the moonroof glass Service and Repair.

2. Slide both glass brackets (A) with the 5 mm hex wrench to the position where the moonroof normally tilts up, and disconnect the drain channel rods (B) on both sides.






3. Slide the drain channel (A) forward.






4. Pull up the rear edge of the drain channel (A) while pushing both clips (B), and release the channel from both hooks (C) of the drain channel slider by pulling it rearward, and remove the drain channel.






5. Install the drain channel in the reverse order of removal, and note these items:

- Push the clips and the hooks into place securely.
- Check the glass position adjustment Adjustments.