Second Row Seat Cushion Cover Replacement

Second Row Seat Cushion Cover Replacement

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*

NOTE:

- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
- Take care not to scratch the body or tear the seat covers.
- Put on gloves to protect your hands.

1. Remove the second row seat.

2. Remove the seat cushion Second Row Seat Disassembly/Reassembly.

3. Remove the seat belt buckle Second Row Seat Belt Replacement.

4. Release the hooks (A) from under the seat cushion, then loosen the seat cushion cover (B).






5. Release the hook strips (A) from both sides the seat cushion.





6. Remove the cushion cover/pad from the seat cushion frame.

7. Release the upholstery rings (A) from under the seat cushion (B).






8. Pull back the edge of the seat cushion cover (A) all the way around, and release the upholstery rings (B), then remove the cover.






9. Install the cushion cover in the reverse order of removal, and note these items:

- To prevent wrinkles when installing the seat cushion cover, make sure the material is stretched evenly over the pad before securing the upholstery rings and the hook strips.
- Replace all of the upholstery rings (A) fastening the seat cushion cover (B) to the pad wires (C) with new ones using commercially available upholstery ring pliers (D).