Third Row Seat Pivot Removal/Installation

Third Row Seat Pivot Removal/Installation

Special Tools Required

- Stopper Plate 82217-SHJ-A01
- KTC Trim Tool Set SOJATP2014
*

NOTE:

- Take care not to scratch the interior trim, the body, or tear the seat covers.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

Center

1. Remove the pivot bolt of the third row seats Third Row Seat Removal/Installation.

2. Remove the bolts, then remove the center pivot (A).





3. Install the center pivot in the reverse order of removal.

Outer

1. Remove the third row seat Third Row Seat Removal/Installation.

CAUTION
Be sure a stopper plate (P/N 82217-SHJ-A01) is fully inserted onto the outer pivot shaft before removing the seat; otherwise, the seat may spring open forcefully.


2. Remove the rear side trim panel Interior Trim Removal/Installation - Rear Side Area.

3. Remove the bolts, then remove the seat outer pivot (A).

NOTE: Do not remove the stopper plate (B) from the outer pivot (C) until the seat is reinstalled.






4. Install the pivot in the reverse order of removal, and note these items:

- Do not remove the stopper plate from the outer pivot until the seat is reinstalled.
- If the stopper plate has been removed during disassembly, bolt the pivot base (A) to the body, and make sure the return springs (B) are hooked on the pivot base plate (C). Rotate the pivot bracket (D), and then reinstall the stopper plate (E) on the pivot shaft.