Front Door Weatherstrip Replacement

Front Door Weatherstrip Replacement

NOTE:

- Take care not to scratch the door.
- Use a clip remover to remove the clips.

1. Remove the power mirror:

- Without driving position memory system Power Mirror Replacement (Without DPMS)
- With driving position memory system Power Mirror Replacement (With DPMS)

2. Remove the door checker mounting bolt (A).





3. Detach the clips (B, C), and release the door weatherstrip (D) from the holder (E) on the door sash, then remove the weatherstrip.

4. Install the door weatherstrip in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips into place securely.
- Make sure the weatherstrip is installed in the holder securely.
- Apply medium strength liquid thread lock to the door checker mounting bolt before installation.
- Check for water leaks Adjustments.