Sliding Door Glass Outer Weatherstrip Replacement

Sliding Door Glass Outer Weatherstrip Replacement

NOTE:

- Once you remove the door glass outer weatherstrip, replace it with a new one because it will bend during removal.
- Put on gloves to protect your hands.
- Take care not to scratch the door.

1. Remove the sliding door panel Sliding Door Panel Removal/Installation.

2. Remove the screw from the rear edge of the door.






3. Starting at the rear, pull up the door glass outer weatherstrip (A) at each area where the inner molding (B) catches the inside edge of the window slot.






4. First slide the door glass outer weatherstrip (A) forward slightly, detach the clip (B) by pulling up the front of the weatherstrip, then slide the weatherstrip rearward to remove it.





5. Install a new outer weatherstrip in the reverse order of removal, and push it into place securely.