Diesel Data: Automotive Repair
Home >> Honda Truck >> 2010 >> Odyssey V6-3.5L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Drive Belts, Mounts, Brackets and Accessories >> Drive Belt Tensioner >> Service and Repair >> Removal and Replacement >> Drive Belt Auto-Tensioner Replacement (J35A7 Engine)

Drive Belt Auto-Tensioner Replacement (J35A7 Engine)




Drive Belt Auto-tensioner Replacement

J35A7 engine

1. Remove the drive belt Drive Belt Replacement (J35A7 Engine).

2. Remove the splash shield Engine Removal.

3. Remove the auto-tensioner.






4. Remove any oil and clean the bolt (A) and the washer (B). Using new engine oil, lubricate the areas shown.





5. Install the auto-tensioner in the reverse order of removal.

6. Do the auto-tensioner air bleeding Procedures.

Diesel-Data.com