Instrument Cluster / Carrier: Service and Repair

Gauge Control Module Replacement

NOTE: Before replacing the gauge control module, retrieve the ODO value and the maintenance minder information from the gauge control module with the HDS Programming and Relearning.

1. Remove the instrument panel Instrument Panel Removal/Installation.

2. Remove the three screws from the gauge control module (A), and spread a protective cloth (B) on the upper column cover.





3. Disconnect the connectors (C), and remove the gauge control module.

4. Install the gauge in the reverse order of removal.

5. Rewriting the ODO data and transfer the maintenance minder data to a new gauge control module Programming and Relearning.