TPMS Control Unit Replacement (Except Touring And Touring With PAX Tires Models)

TPMS Control Unit Replacement

NOTE: Make sure the TPMS control unit mounting bracket is not bent or twisted as this may affect its communication with the tire pressure sensors.

1. Turn the ignition switch to LOCK (0).

2. Remove the headliner Service and Repair.

3. Disconnect the TPMS control unit connectors (A).





4. Remove the TPMS control unit (B) from the bracket (C).

5. Install the TPMS control unit in the reverse order of removal.

6. Connect the HDS, and memorize the tire pressure sensor IDs using the TPMS tool Memorizing The Tire Pressure Sensor ID (Except Touring And Touring With PAX Tires Models).