Center Console Rear Trim Vent Replacement

Center Console Rear Trim Vent Replacement

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*Available through the Honda Tool and Equipment Program, 888-424-6857

NOTE:

- Take care not to scratch the console or the trim.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Remove the center console rear trim Center Console Rear Trim Removal/Installation.

2. Remove the screw, then remove the center console upper duct (A).






3. Remove the screws, then remove the rear console vent (A) and the rear console vent trim (B) from the center console rear trim (C).






4. Install the vent in the reverse order of removal.