Passenger's Dashboard Trim Removal/Installation

Passenger's Dashboard Trim Removal/Installation

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*Available through the Honda Tool and Equipment Program, 888-424-6857

NOTE:

- Take care not to scratch the dashboard and its related parts.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Open the front door, and remove the passenger's dashboard side panel (A).

1. Pull out the front door opening seal (B), as needed.

2. Gently pry the front edge of the side panel with a trim tool to release the hooks (C), then remove the side panel.





2. Remove the passenger's dashboard trim (A).

1. Remove the hook (B).

2. Pry out the side edge of the trim to detach the clips, then remove the passenger's dashboard trim.





3. Install the trim in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips and the hooks into place securely.