Console Armrest Removal/Installation

Console Armrest Removal/Installation

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*Available through the Honda Tool and Equipment Program; 888-424-6857

NOTE:

- Take care not to scratch the console.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Remove the center console trim.

2. Remove the TORX screws with a TORX T20 bit, release the hooks (A, B), then remove the armrest (C).





3. Install the armrest in the reverse order of removal, and push the hooks into place securely.