Intermediate Shaft Removal

Intermediate Shaft Removal

1. Drain the transmission fluid, then reinstall the drain plug with a new sealing washer ATF Replacement.

2. Remove the right front driveshaft.

3. Remove the subframe stiffener.

4. Remove the exhaust pipe A Service and Repair.

5. Remove the rear warm up three way catalytic converter (WU-TWC) bracket (A).






6. Remove the flange bolt (A), and two dowel bolts (B).





7. Remove the intermediate shaft (C) from the differential. Hold the intermediate shaft horizontally until it is clear of the differential to prevent damaging the oil seal (D), then remove the set ring (E).