P2227

DTC P2227: BARO Sensor Range/Performance Problem

NOTE: Information marked with double asterisk (**) applies to 2004-2005 models.

1. Reset the ECM with the HDS.
2. Start the engine. Hold the engine speed at 3,000 rpm without load (in Park or neutral) until the radiator fan comes on, then let it idle.
3. Test-drive with A/T in D position (M/T in 4th gear).
4. Accelerate for 5 seconds using wide open throttle.
5. Check for a Temporary DTCs or DTCs with the HDS.

Is DTC (P2227)** indicated?

YES - Update the ECM if it does not have the latest software, or substitute a known-good ECM, then recheck. If the symptom/indication goes away with a known-good ECM, replace the original ECM.

NO - Intermittent failure, system is OK at this time.