Front Inner Fender Replacement

Front Inner Fender Replacement

NOTE:

- Put on gloves to protect your hands.

- Take care not to scratch the body.

1. Remove the front inner fender (A).
-1 On the back of the wheel arch, remove the screws (B) and the clip (C), and remove the front splash guard (D) (Canada models).
-2 From under the front bumper (E), remove the clip (F) securing the front bumper, the splash shield (G), and the front inner fender, and remove the clips (H) securing the front bumper and the inner fender.
-3 From the wheel arch, remove the clips (I, J, K) that secure the front inner fender (and splash shield) to the body.
-4 From the wheel arch, remove the clip (L) that secure the front inner fender to the resonator chamber (left side) or the body (right side).
-5 Release the hook (M) of the splash shield, then remove the front inner fender.
-5 NOTE: To remove the clips (C, F, H, I, K, L), pry the inner clip pins up at the edge near the line (N) on the clip heads.

2. Install the inner fender in the reverse order of removal, and note these items:
- If the clips are damaged or stress-whitened, replace them with new ones.

- Push the clips into place securely.