Secondary Shaft Sealing Ring Replacement (A/T)

Secondary Shaft Sealing Ring Replacement

The sealing rings are synthetic resin with chamfered ends. Check the condition of the sealing rings, and replace them only if they are worn, distorted, or damaged.

1. For a better fit, squeeze sealing rings together slightly before installing them.






2. Apply ATF to new sealing rings, then install them on the mainshaft.

3. After installing the sealing rings, check the following:
- The rings are fully seated in the groove.

- The rings are not twisted.

- The chamfered ends of the rings are properly joined.