A/T Clutch Pressure Control Solenoid Valve A Replacement

A/T Clutch Pressure Control Solenoid Valve A Replacement

1. Remove the air cleaner assembly Service and Repair and the intake air duct.

2. Remove the mounting bolts securing the harness cover (A), and remove the harness clamp (B).

3. Disconnect the A/T clutch pressure control solenoid valve A connector.






4. Remove the mounting bolts and A/T clutch pressure control solenoid valve A.

5. Remove the ATF pipe (B), the ATF joint pipes (C), the O-rings (D), and the gasket (E).

6. Check the fluid passage of the transmission housing for dust or dirt, and clean the passage.

7. Install a new gasket with the blue side down and the white side up on the transmission housing, and install the ATF pipe and the ATF joint pipes.

8. Install new O-rings over the ATF joint pipes.

9. Install a new A/T clutch pressure control solenoid valve A.

10. Check the A/T clutch pressure control solenoid valve A connector for rust, dirt, or oil, then connect the connector securely.

11. Secure the harness cover with the mounting bolts, and install the harness clamp.

12. Install the intake air duct and the air cleaner assembly. Service and Repair