Interior Trim Removal/Installation - Front Roof Area

Interior Trim Removal/Installation - Front Roof Area

Special Tools Required

- KTC trim tool set SOJATP2014*
NOTE:

- Put on gloves to protect your hands.

- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

- Take care not to bend or scratch the trim or the panels.

1. Remove the trim in the numbered sequence.

2. Install the trim in the reverse order of removal, and note these items:
- If the clips are damaged or stress-whitened, replace them with new ones.

- Make sure the connector is plugged in properly.

- Push the clips into place securely.

- If the threads on the visor screws are worn out, use an oversized screw (P/N 90132-SZ3-003) made specifically for this application.