Interior Trim Removal/Installation - Rear Tray Area (Except CR model)

Interior Trim Removal/Installation - Rear Tray Area

Special Tools Required

- KTC trim tool set SOJATP2014*

Except CR Model

NOTE:

- Put on gloves to protect your hands.

- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

- Take care not to bend or scratch the top cloth, the rear window, the trim, or the panels.

1. Remove the trim in numbered sequence.

2. Install the trim in the reverse order of removal, and note these items:
- If the clips are damaged or stress-whitened, replace them with new ones.

- Apply medium strength liquid thread lock to the anchor bolts before reinstallation.

- Before installing the anchor bolts, make sure there are no twists or kinks in the seat belt.

- Push the clips into place securely.