Convertible Top Cloth Replacement

Convertible Top Cloth Replacement

Special Tools Required

- KTC trim tool set SOJATP2014*
NOTE:

- Take care not to scratch the top frame.

- Put on gloves to protect your hands.

- Wear eye protection when removing the rivets with a drill.

- When removing the rivets, drill holes in the rivets with a 4 mm (0.16 in.) drill.

- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

- This illustration shows the left side of the vehicle, repeat the procedure on the right side in the same manner.

Cloth Replacement

1. Remove the convertible top assembly. Service and Repair

2. Remove the convertible top cloth in the numbered sequence.

3. Install the cloth in the reverse order of removal, and note these items:
- To prevent wrinkles when installing the cloth, make sure the material is stretched evenly over the frame before securing the screws and the rivets.

- After installing the cloth, reinstall the convertible top assembly. Check the operation of the convertible top, and inspect the cloth for wrinkles.

- Check that the weatherstrips fit flush.

- Check that each door glass contacts the weatherstrips evenly If necessary, adjust each retainer.. Adjustments

- Check for water leaks. Adjustments

- Test-drive, and check for wind noise and rattles.









Reinstalling the Convertible Top Cloth to each Bow

Make sure the alignment notch of the convertible top cloth is in the center portion of the retainer. After reinstalling, press on the retainers securely.

Center portion





Convertible Top Cloth and Weatherstrip Check