Removable Hardtop Interior Trim Removal/Installation

Removable Hardtop Interior Trim Removal/Installation

Special Tools Required

- KTC trim tool set SOJATP2014*
NOTE:

- Put on gloves to protect your hands.

- Remove the hardtop from the body before removing or installing the hardtop interior trim.

- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

- Use a clip remover to remove the rear window lower trim clips.

- Take care not to bend or scratch the interior trim.

1. Remove the trim as shown.

2. Install the trim in the reverse order of removal, and note these items:
- Replace the damaged adhesive tape, and if the clips are damaged or stress-whitened, replace them with new ones.

- Push the clips into place securely.

- Before peeling away the adhesive backing from the adhesive tape on the end cap, temporarily install the roof side trim on the roof, and check the position of the trim end.

- When installing the roof side trim, first install the front end, and insert the lower end into the end cap, then push the corner portion against the roof securely. Make sure there is no clearance between the trim and cap.