Camshaft Removal

Camshaft Removal

1. Remove the air cleaner housing assembly Service and Repair.

2. Remove the intake manifold chamber Intake Manifold Chamber Removal/Installation.

3. Remove the following engine wire harness connectors and wire harness clamps from the cylinder head:

- Four injector connectors
- Engine coolant temperature (ECT) sensor 1 connector
- Camshaft position (CMP) sensor connector
- Air fuel ratio (A/F) sensor connector
- Secondary heated oxygen sensor (secondary HO2S) connector

4. Remove the harness holder mounting bolt and the ground cable, then remove the harness holder from the bracket Cylinder Head Removal.

5. Remove the camshaft sprocket Camshaft Sprocket Removal.

6. Remove the rocker arm assembly Rocker Arm Assembly Removal.

7. Remove the CMP sensor CMP Sensor Replacement.

8. Remove the camshaft thrust cover (A), then remove the camshaft (B).