Moonroof Drain Channel Replacement

Moonroof Drain Channel Replacement

1. Remove the moonroof glass Service and Repair.

2. On both sides, slide the glass brackets (A) with the moonroof switch to the position where the moonroof normally tilts up, and disconnect the drain channel rods (B).






3. Slide the drain channel (A) forward.






4. Pull up the rear edge of the drain channel (A) while pushing both clips (B), and release the channel from both hooks (C) of the drain channel slider by pulling it rearward, then remove the drain channel.

NOTE: Take care not to damage the drain channel seal (D).





5. Install the drain channel in the reverse order of removal, and note these items:

- Push the clip area into place securely.
- Check the glass position adjustment Adjustments.