Forced Starting Of The Navigation Unit

Forced Starting of the Navigation Unit

Special Tools Required

- SCS Service Connector 07PAZ-001010A

1. Turn the ignition switch to LOCK (0).

2. Remove the passenger's cargo side cover Interior Trim Removal / Installation - Cargo Area.

3. Connect the SCS service connector (A) to the navigation service check connector (B) located behind the navigation unit (C).





4. Turn the ignition switch to ON (II).

5. Check that the diagnosis menu for the picture diagnosis starts up, and then changes to the System Links menu.

NOTE: If the display fails to display the System Links screen, refer to No picture is displayed troubleshooting Symptom Troubleshooting.