Center Console Rear Trim Removal / Installation

Center Console Rear Trim Removal/Installation

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*

NOTE:

- Take care not to scratch the center console or the related parts.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Gently pull out the center console rear trim (A) to detach the clips, then remove the trim.






2. If necessary, disassemble the center console rear trim.

1. Remove the screws (A, B), release the hooks (C) and the tabs (D), then separate the upper trim (E) and the rear vent (F) as an assembly from the lower trim (G).

2. Remove the screws (H), then separate the upper trim and the rear vent.





3. Install the trim in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips, the hooks, and the tabs into place securely.