A/T Shift Lever Knob Replacement

A/T Shift Lever Knob Replacement

NOTE: Make sure not to get any silicone grease on the terminal part of the connectors and switches, especially if you have silicone grease on your hands or gloves.

1. Wrap the end of a flat-tip screwdriver with tape, pry the shift lever knob cover lock tabs (A), then remove the shift lever knob cover (B).






2. Remove the screws (A) securing the shift lever knob (B), then remove the shift lever knob.






3. Remove the shift lever ring (A) from the shift lever knob (B).






4. Apply silicone grease to the top (C) of the shift lever rod.

5. Replace the shift lever knob, then install the shift lever ring to the shift lever knob.

6. Install the shift lever knob on the shift lever, and secure it with new screws.

7. Install the shift lever knob cover on the shift lever knob.