Driver's Dashboard Undercover Removal/Installation

Driver's Dashboard Undercover Removal/Installation

NOTE: Take care not to scratch the dashboard or its related parts.

1. Remove the driver's dashboard undercover (A).

1. Turn the lock knob (B) 90 °.

2. Gently pull down the rear edge to detach the clip.

3. Pull the undercover away to release the pins (C) from the holders (D).

4. With HFL: Disconnect the HFL control unit connector (E).





2. Install the undercover in the reverse order of removal, and note these items:

- If the clip is damaged or stress-whitened, replace it with a new one.
- Push the clip and pins into place securely.