Evaporative Emission Control Canister: Service and Repair

EVAP Canister Replacement

1. Raise the vehicle on a lift Service and Repair.

2. Except LX (A/T model): Remove the fuel tank cover (A)






3. LX (A/T model): Remove the floor under cover assembly (A).






4. Remove the hoses (A), and disconnect the fuel subharness 6P connector (B).






5. Remove the bolts (A).





6. Remove the EVAP canister assembly (B).

7. Disconnect the FTP sensor connector (C), the hose (D), and the clips (E).

8. Disconnect the hose (A), remove the retainer (B) and remove the FTP sensor (C).

NOTE: When installing the FTP sensor, use a new O-ring (D).





9. Install the parts in the reverse order of removal.