Roof Rail Rear Assist Handle Replacement

Roof Rail Rear Assist Handle Replacement

Removal Procedure





1. Remove the hinge pillar garnish trim. Refer to Body Hinge Pillar Trim Panel Replacement (Body Hinge Pillar Trim Panel Replacement) .
2. Remove the bolts that retain the assist handle to the vehicle.
3. Remove the assist handle from the vehicle.



Installation Procedure





1. Install the assist handle to the vehicle.
2. Install the bolts that retain the assist handle to the vehicle.

Notice: Refer to Fastener Notice Service Precautions .

3. Install the hinge pillar garnish trim. Refer to Body Hinge Pillar Trim Panel Replacement (Body Hinge Pillar Trim Panel Replacement) .

Tighten the bolts to 12 Nm (9 lb ft).