Molding Replacement - Endgate Center

Molding Replacement - Endgate Center

Removal Procedure





1. Fold the rear seats forward.
2. Remove the rear folding seat back covers. Refer to Seat Back Cover Replacement - Rear Folding (Seat Back Cover Replacement - Rear Folding) in Seats.
3. Remove the midgate hinge cover trim (1). Refer toMidgate Hinge Finish Cover Replacement (Midgate Hinge Finish Cover Replacement) .




4. Pull the endgate center molding (1) towards the front of the vehicle to release the clips.
5. Remove the endgate center pillar molding.



Installation Procedure





1. Position the endgate center molding (1) to the body and align the clips to the body.
2. Push the endgate center molding (1) towards the rear of the vehicle to engage the molding clips.




3. Install midgate hinge trim cover (1). Refer toMidgate Hinge Finish Cover Replacement (Midgate Hinge Finish Cover Replacement) .
4. Install the rear folding seat back covers. Refer to Seat Back Cover Replacement - Rear Folding (Seat Back Cover Replacement - Rear Folding) in Seats.
5. Restore the rear seats to the upright position.