Spoiler: Service and Repair

Rear Spoiler

Removal
1 Remove the liftgate upper trim panel. For additional information, refer to Liftgate Upper Trim Panel Liftgate Upper Trim Panel




2 Remove the 3 bolts securing the rear spoiler to tailgate.
3 Disconnect the electrical connector.
4 If equipped disconnect the electrical connector from the parking aid camera.




5 Remove the rear spoiler.
- Carefully release the clips.
- Release the electrical harness.




6
NOTE:
Do not disassemble further if the component is removed for access only.
Remove the high mounted stoplamp.
- Remove the 4 screws.
- Remove the wiring harness.




7 Remove the parking aid camera.
- Remove the screw.
- Carefully release the 2 clips.




8 If equipped remove the parking aid camera bracket.
- Drill out the rivet.
- Remove the adhesive pad.

Installation
1 If equipped install the parking aid camera.
- Install the rivet.
- Install the adhesive pad.
2 If equipped install the parking aid camera.
- Install the clips.
- Install the screws.
3 Install the high mounted stoplamp.
- Secure the wiring harness.
- Install the screws.
4 Install the rear spoiler to the tailgate.
- Tighten the bolts to 10 Nm (7 lb.ft).
5 Connect the electrical connector.
6 If equipped connect the electrical connector to the parking aid camera.
7 Install the liftgate upper trim panel. For additional information, refer to Liftgate Upper Trim Panel Liftgate Upper Trim Panel