Diesel Data: Automotive Repair
Home >> Lexus >> 2008 >> ES 350 V6-3.5L (2GR-FE) >> Repair and Diagnosis >> Restraints and Safety Systems >> Seat Belt Systems >> Seat Belt >> Service and Repair >> Rear Seat Inner Belt Assembly >> Removal

Removal








SEAT BELT: REAR SEAT INNER BELT ASSEMBLY:

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (w/ Rear Seat Side Airbag)
CAUTION: Wait for 90 seconds after disconnecting the cable to prevent airbag deployment Service Precautions.

2. REMOVE REAR SEAT CUSHION ASSEMBLY Removal

3. REMOVE REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH






(a) Remove the bolt and the rear seat inner with center belt assembly LH.
4. REMOVE REAR SEAT HEADREST ASSEMBLY
5. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY
6. REMOVE REAR SEATBACK ASSEMBLY Removal

7. REMOVE REAR DOOR SCUFF PLATE LH Removal

8. REMOVE REAR DOOR SCUFF PLATE RH Removal

9. REMOVE REAR SEAT SIDE GARNISH LH (w/o Rear Seat Side Airbag) Removal

10. REMOVE REAR SEAT SIDE GARNISH RH (w/o Rear Seat Side Airbag) Removal

11. REMOVE REAR SEAT SIDE AIRBAG ASSEMBLY LH (w/ Rear Seat Side Airbag) Removal

12. REMOVE REAR SEAT SIDE AIRBAG ASSEMBLY RH (w/ Rear Seat Side Airbag)
HINT: Use the same procedure for the RH side and the LH side.

13. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY LH Removal

14. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY RH Removal

15. DISCONNECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY LH






(a) Remove the bolt and disconnect the floor end of the rear seat 3 point type belt assembly LH.
16. DISCONNECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY RH
HINT: Use the same procedure for the RH side and the LH side.

17. DISCONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH






(a) Remove the bolt and disconnect the floor end of the rear seat inner with center belt assembly RH.
18. REMOVE REAR SEAT SHOULDER BELT HOLE COVER






(a) Disengage the 4 claws and remove the rear seat shoulder belt hole cover.
HINT: Use the same procedure for the other 2 rear seat shoulder belt hole covers.

19. REMOVE CENTER STOP LIGHT SET (w/o Rear Sunshade) Removal

20. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/o Rear Sunshade)






(a) Disengage the 2 clips.
(b) Pass the 3 rear seat belt floor anchors through the package tray trim panel assembly.
(c) Disengage the 6 claws and remove the package tray trim panel assembly.
21. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Rear Sunshade) Removal

22. REMOVE REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH






(a) Remove the bolt and the rear seat inner with center belt assembly RH.
Diesel-Data.com