Removal

AXLE AND DIFFERENTIAL: REAR AXLE CARRIER: REMOVAL

HINT
* Use the same procedure for the RH side and LH side.
* The procedure listed below is for the LH side.

1. REMOVE REAR AXLE ASSEMBLY

HINT
Refer to the procedure up to Remove Rear Axle Assembly Removal.

2. REMOVE REAR NO. 2 WHEEL BEARING DUST DEFLECTOR Removal

3. REMOVE REAR AXLE HUB AND BEARING ASSEMBLY Removal

4. REMOVE REAR AXLE CARRIER SUB-ASSEMBLY

(a) Hold the rear axle assembly between aluminium plates in a vise.





NOTICE:
Do not overtighten the vise.

(b) Remove the 2 nuts, parking brake anchor block sub-assembly, cable support bracket and parking brake plate sub-assembly.