Sunroof / Moonroof Motor: Service and Repair

SUNROOF MOTOR REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.
2. Remove the following parts:
1. Console (4 door)
2. A-pillar trim
3. Upper anchor of the front seat belt
4. Front scuff plate
5. Rear scuff plate
6. B-pillar lower trim
7. B-pillar upper trim
8. Rear seat
9. Tire house trim
10. Trunk side upper trim (5 door)
11. C-pillar trim
12. Map light
13. Sunvisor
14. Assist handle
15. Headliner






3. Disconnect the sunroof motor connector.
4. Remove the screws, then remove the sunroof motor.
5. Install in the reverse order of removal.

NOTE: If the glass panel or the sunroof motor is moved with the sunroof motor removed, initial position setting of the sunroof motor will be required. Perform initial position setting referring to the Sunroof Motor Assembly Note.