Work Procedure

UNIT CHARACTERISTICS WRITING


Work Procedure

1.UNIT CHARACTERISTICS WRITING
With CONSULT-III





1. Confirm the unit characteristics (A and B) of electric controlled coupling (left and right).

NOTE:
- This illustration is sample.
- For the illustration, the unit characteristics are following.





2. Turn the ignition switch OFF to ON.
3. Select "UNIT CHARACTERISTICS WRITE" in "WORK SUPPORT" for "ALL MODE AWD/4WD".
4. Input unit characteristics.
5. Select "Start".
6. Check that "UNIT CHARACTERISTICS WRITE COMPLETED" is displayed.
- WORK END