Instrument Panel Compartment - Door Latch Release Handle Replacement

Instrument Panel Compartment Door Latch Release Handle Replacement

Removal Procedure

1. Remove the IP storage compartment. Refer to Instrument Panel Storage Compartment Replacement (Service and Repair).




2. Disconnect the lever rod (2) from the handle.
3. Remove the clip (3) that secures the IP compartment handle to the door.
4. Remove the handle assembly from the door.

Installation Procedure




1. Install the IP compartment handle and insert the clip (3).
2. Install the lever rod (2) to the handle.
3. Install the IP storage compartment. Refer to Instrument Panel Storage Compartment Replacement (Service and Repair).