Child Seat Tether Attachment: Service and Repair

Child Restraint Tether Anchor Replacement (Upper)

Removal Procedure





1. Remove the rear access panel (2).
2. Remove the following components from the vehicle:

* The bolt (3)
* The child seat anchor bracket (4)




Installation Procedure






Notice: Refer to Fastener Notice (Fastener Notice).

1. Install the child seat anchor bracket (4) to the vehicle. Secure the bracket with the bolt (3).

Tighten the child seat anchor bracket bolt to 20 N.m (15 lb ft).

2. Install the rear access panel (2).