Clutch Slave Cylinder: Service and Repair

Clutch Actuator Cylinder Replacement

Removal Procedure





1. Remove the clutch actuator cylinder fluid line from the clutch actuator cylinder.




2. Remove the clutch actuator cylinder bolts.
3. Remove the clutch actuator cylinder from the transaxle.



Installation Procedure





1. Install the clutch actuator cylinder to the transaxle.

Notice: Refer to Fastener Notice .

2. Install the clutch actuator cylinder bolts.

Tighten the clutch actuator cylinder bolts to 12 N.m (9 lb ft).





3. Install the clutch actuator cylinder fluid line to the clutch actuator cylinder.
4. Bleed the hydraulic clutch system. Refer to Hydraulic Clutch Bleeding (Service and Repair).