Front Bumper Fascia Upper Support Replacement

Front Bumper Fascia Upper Support Replacement


Removal Procedure

1.Open the hood.





2.Remove the push-in retainers from the upper fascia support.





Note:The upper fascia support must clear the hood latch.

3.Remove the bolts from the rear of the front fascia support.





4.Remove the upper fascia support.

Pull back on the upper fascia.

Installation Procedure





Note:The upper fascia support must clear the hood latch.

1.Pull back the front fascia and install the upper fascia support.

Caution:Refer to Fastener Caution .





2.Install the bolts to the rear of the front fascia support.

TightenTighten the bolts to 6 N �m (53 lb in).





3.Install the push-in retainers to the upper fascia support.

4.Close the hood.